特别黄的视频免费播放:13605413887(蘇經理)
特别黄的视频免费播放:1120779656@qq.com
特别黄的视频免费播放:蘇經理
特别黄的视频免费播放:13181713577(王經理)
網址:
特别黄的视频免费播放:濟南市章丘區刁鎮工業開發區

等離子切割機粉塵的危害有哪些?

來源:/   发布时间:2019-08-07 10:12:28
  目前,許多生産廠家,用了很多等離子激光切割機,因爲這種設備切割效率高,而且切割質量更好,所以得到了很多公司和客戶的認可。但在等離子切割機工作,會産生一些有害物質,會造成空氣汙染和噪音汙染,等離子切割粉塵需要根據環境保護的要求,過濾灰塵收集淨化設備放電後,本文通過不斷藍色綠色,小編帶你了解等離子切割粉塵危害。
  At present, many manufacturers use a lot of plasma laser cutting machine, because this equipment has high cutting efficiency and better cutting quality, so it has been recognized by many companies and customers. But when the plasma cutting machine works, it will produce some harmful substances, which will cause air pollution and noise pollution. The plasma cutting dust needs to be filtered according to the requirements of environmental protection. After discharging the dust collection and purification equipment, this paper will show you the hazards of plasma cutting dust through continuous blue-green, small braiding.
  等離子切割時的危害主要包括幾個方面,一個是切削過程中電弧造成的眼部受傷,第二個是産生大量的有毒有害氣體在切割的過程中,人體吸入後會影響健康,三是減少火花當火星將導致燒傷皮膚,四是切割高頻噪音,時間很長一段時間容易造成傷害耳朵,第五,更重要的是,當等離子切割産生高頻和高頻振蕩電磁輻射時,會對人體造成損害,長期從業人員可能會造成很大的危害。
  The hazards of plasma cutting mainly include several aspects, one is the eye injury caused by arc during cutting, the second is the production of a large number of toxic and harmful gases in the cutting process, the human body will affect health after inhalation, the third is to reduce sparks when Mars will cause burns to the skin, the fourth is cutting high-frequency noise, for a long time. Easy to cause damage to the ear, fifth, and more importantly, when plasma cutting produces high-frequency and high-frequency oscillating electromagnetic radiation, it will cause damage to the human body, long-term practitioners may cause great harm.
  金屬煙灰在切割過程中産生的具體危害,下面衡蘭環保公司小編爲您詳細介紹一下:
  Metal soot in the cutting process of specific hazards, the following Hengland Environmental Protection Company Xiaobian for you to introduce in detail:
  1,臭氧是一种无色有害气体,有一种特殊的刺激性气味,有很强的刺激呼吸道和肺部,短期吸入低浓度臭氧(0.4 mg / m3)可以导致咳嗽、嗓子发干、胸闷、食欲不振、疲劳等症状,长期吸入低浓度臭氧会导致支气管炎,肺气肿,肺硬化等;
  1. Ozone is a colorless harmful gas. It has a special irritating odor. It stimulates the respiratory tract and lungs. Short-term inhalation of low concentration ozone (0.4 mg/m3) can cause cough, dry throat, chest tightness, loss of appetite, fatigue and other symptoms. Long-term inhalation of low concentration ozone can lead to bronchitis, emphysema, pulmonary sclerosis, etc.
光氧催化設備
  2. 一氧化碳是一种无色、无味、无刺激性的气体,在人体中很容易与血红蛋白结合。因此,当大量血红蛋白与一氧化碳结合时,由于缺氧可能导致人体组织坏死。
  2. Carbon monoxide is a colorless, tasteless, non-irritating gas that binds easily to hemoglobin in the human body. Therefore, when a large amount of hemoglobin binds to carbon monoxide, hypoxia may lead to necrosis of human tissues.
  3,等离子体电光光辐射强度很大,其主要由紫外线(uv)辐射,可见辐射和红外辐射,紫外线强度,特别是,如260 - 290微米波长的紫外线(uv)辐射相对强弱是氩弧焊的2.2倍,除了光学辐射,人体的危害和烟尘和其他有毒气体,高强度、高频率的噪音,高频产生的高频振荡器对人体造成危害。
  3. The intensity of plasma electro-optic radiation is very high. It mainly consists of ultraviolet (uv) radiation, visible radiation and infrared radiation. The intensity of ultraviolet radiation, especially, the relative intensity of ultraviolet (uv) radiation at 260-290 micron wavelength is 2.2 times as strong as that of argon arc welding. In addition to optical radiation, human hazards, smoke and other toxic gases, it has high intensity and high frequency. Noise, high frequency oscillator produced by high frequency cause harm to human body.
  4、氧化氮是一種有毒氣體和刺激性氣味,氮氧化物主要是二氧化氮,這是一個紅色和棕色氣體有特殊氣味,吸入,通過上呼吸道進入肺泡,逐漸和水效應,導致嚴重的肺組織的刺激和腐蝕,引起肺水腫。
  4. Nitric oxide is a toxic gas and irritating odor. Nitrogen oxide is mainly nitrogen dioxide. It is a red and brown gas with a special odor. Inhaled, it enters the alveoli through the upper respiratory tract. Gradually, it has a water effect, which leads to severe pulmonary tissue irritation and corrosion, and causes pulmonary edema.
  從事切割切割工作的工人都知道,在等離子切割機切割3~6mm的碳鋼板材時,會産生大量的黃色煙霧,這種黃色煙霧對人體非常有害,長期吸入容易形成塵肺。所以在等離子切割工作中,需要做好等離子切割粉塵的淨化工作,從而減少職業病的發生
  Workers engaged in cutting and cutting work all know that when plasma cutting machine cuts 3-6 mm carbon steel plate, it will produce a large number of yellow smoke, which is very harmful to human body, and easy to form pneumoconiosis after long-term inhalation. Therefore, in plasma cutting work, we need to do a good job in plasma cutting dust purification, so as to reduce the occurrence of occupational diseases.
相關標簽: 光氧催化設備、
  • 低溫等離子體處理惡臭廢氣 介紹了低溫等離子體對電子企業産生的惡臭氣體的治理,該裝置對惡臭濃...
  • UV光解除臭設備的原理 V光解除臭設備的原理是利用特制的高能高臭氧UV紫外線光束對廢氣進行...
  • UV光氧催化淨化設備需要... 在國家政策面前所有的調整都是爲了全民的利益能夠得到好的保障而制...
  • 光氧催化設備的工作原理 光氧催化設備在光照下,如果光子的能量大于半导体禁带宽度,其价带...